info@mrfilament.co.za Follow us on Social Media
Sold
out

Fil X – PLA – Wayless – Red – 1kg – 1.75mm

R425.00
Out of stock
Estimated Delivery:
13 - 20 Apr, 2024
Free Shipping & Returns:
On all orders over R5,000.00

Description

Fil X Wayless PLA is a 3D filament that is used where light weight 3D printing material is required for structural applications within the limitations of PLA polymer.

Typical application would be hobbiest airplane, race car, wind turbine and boat parts.

This filament has been made with PLA polymer, colour pigment and special foaming additive.
The environmental impact of using this filament is smaller than most petroleum based polymers due to the biodegradability of our PLA grade, and the harmless inert gas generated by the foaming process.

 

 

Quick Comparison

SettingsFil X - PLA - Wayless - Red - 1kg - 1.75mm removeFil X - SBS - Translucent - Blue -1kg - 1.75mm removeDaVinci Lab - Wood - Red - PLA - 0.8kg - 1.75mm removeSunLu - Filament - Silky PLA+ - Light Rainbow - 1kg - 1.75mm removeFil X - SBS - Lilac - 1kg - 1.75mm removeFil X - SBS - Lime Milkshake - 1kg - 1.75mm remove
NameFil X - PLA - Wayless - Red - 1kg - 1.75mm removeFil X - SBS - Translucent - Blue -1kg - 1.75mm removeDaVinci Lab - Wood - Red - PLA - 0.8kg - 1.75mm removeSunLu - Filament - Silky PLA+ - Light Rainbow - 1kg - 1.75mm removeFil X - SBS - Lilac - 1kg - 1.75mm removeFil X - SBS - Lime Milkshake - 1kg - 1.75mm remove
ImageFil X - SBS - Translucent - BlueSUNLU - SILKY PLA+ FILAMENT – LIGHT RAINBOW
SKUWayless175-1-REDFILXTRANSBLUEDAVINCIREDWOODPCFSUN1PLASILKR2SBS175-1-LilacSBS175-1-LimeMilk
Rating
Price
R425.00
R295.00
R445.00
R450.00
R295.00
R295.00
Stock
Out of stock
Only 2 items left in stock!
Out of stock
3 in stock
9 in stock
Only 2 items left in stock!
Description
Flow % Nozzel Temp Print Speed Wall Thickness Foam Weight Weight Diff Normal PLA
100 195 40 0.8 No 3.2 0
80 215 40 0.81 Fine 2.6 0.6
76 230 40 0.79 Medium 2.4 0.8
74 240 40 0.81 Medium 2.2 1

Foaming density of this filament is a result of 2 variables:


1)The time the polymer spend in the print head (PRINT SPEED)


2) The temperature of the print nozzle.


The best practice for determining your maximum achievable foaming would be done by experimentation with the two variables.


For example slow 40mm/min print speed at 220˚C can give the same result as 50mm/min at 250˚C.


It is important to adjust the printer material flowrate down in the same percentage that wall thickness increases, as foaming
increases if you want weight loss of your model.

You can use the formula to adjust Flow Rate:
Thickness of IDEAL foamed sample 'Wayless' X Flow rate of UNFOAMED sample 'Wayless'
Thickness of UNFOAMED sample 'Wayless'

Fil X recommends:

A Nozzle Temperature of  215°C - 230°C

And a Bed temperature of 70°C 

Print temp :- 190 - 220 degrees Heated Bed :- 50 - 60 degrees (optional) Speed range :- 40 - 70 mm/s Fan :- Yes Weight :- 0.8kg Printability :- Easy - intermediate

SUNLU SILKY PLA+ FILAMENT – SUGGESTED PRINT SETTINGS:

  • Nozzle: Temperature (°C)         

– 190°C to 230°C

  • Nozzle: Material

– Brass / Any

  • Nozzle: Size (mm)

– Standard: 0.4mm

  • Bed: Temperature (°C)

– No Heat / 50 to 70

  • Bed: Adhesion

– BuildTak / Magigoo / Painters Tape / PEI

  • Printing Speed (mm/s)

– 30 to 60

  • Part Cooling Fan

– On 100% from Layer 2+

Fil X recommends a Nozzle Temperature of 220 – 250°C And a Bed temperature of 80°CFil X recommends a Nozzle Temperature of 220 – 250°C And a Bed temperature of 80°C
Weight1.2 kg1.2 kg1.2 kg1.2 kg1.2 kg1.2 kg
Dimensions22 × 22 × 7 cm22 × 22 × 7 cm22 × 22 × 7 cm22 × 22 × 7 cm22 × 22 × 7 cm22 × 22 × 7 cm
Additional information
Weight 1.2 kg
Dimensions 22 × 22 × 7 cm
Weight 1.2 kg
Dimensions 22 × 22 × 7 cm
Weight 1.2 kg
Dimensions 22 × 22 × 7 cm
Weight 1.2 kg
Dimensions 22 × 22 × 7 cm
Weight 1.2 kg
Dimensions 22 × 22 × 7 cm
Weight 1.2 kg
Dimensions 22 × 22 × 7 cm
Add to cart

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Add to cart
Click outside to hide the comparison bar
Compare
Need Help? Chat with us