info@mrfilament.co.za Follow us on Social Media
Sold
out

CRON – PLA – Shining Rainbow – 1kg – 1.75mm

R400.00
Out of stock
Estimated Delivery:
21 - 28 Apr, 2024
Free Shipping & Returns:
On all orders over R5,000.00

Description

Shining Rainbow PLA filament for open source 3D Printers is a transparent rainbow filament with glitter particles in it. Rainbow filament is filament of which the colour changes throughout the roll. This filament changes colour between red, orange and green.

High quality, constant diameter, bright constant colours for accurate repeatable prints. The filament comes on a plastic spool and is sealed in a plastic bag with dececant and packaged in a box (sometimes we remove the filament from the box to fit everything into your parcel). Each spool is marked with the type of filament, the recommended printing temperature and the manufacturing batch number. We have a lot of confidence in the filament we supply, because we use it ourselves.

PLA (Polylactic acid) is very common in the 3D Printers industry. This is mostly due to its low thermal expansion coefficient. This means less warping and curling during printing. PLA is not as tough as other plastics, but delivers prints with very high dimentional accuracy, ideal for prototyping and scale models. It is available in a range of colors and is easy to print with.

Specifications:

  • Amount: 1kg
  • Colour: Shining PLA Rainbow
  • Diameter: 1.75mm
  • Tolerance: +- 50 Micron
  • Spool dimensions: OD = 200mm, ID = 54mm, Width = 67mm
  • Recommended printing temperature: 200 Deg C
  • Recommended bed temperature: 60 Deg C
  • Recommended bed preparation: Hairspray
  • Note: Additional cooling fan recommended for Silk filament

Quick Comparison

SettingsCRON - PLA - Shining Rainbow - 1kg - 1.75mm removeFil X - SBS - Skin 02 - 1kg - 1.75mm removeCRON - PLA - Multi Colour (Rainbow) - 1kg - 1.75mm removeSunLu - Filament - Silky PLA+ - Light Rainbow - 1kg - 1.75mm removeCCTREE - PLA Silk - Dual -Gold/ Purple - 1kg - 1.75mm removeCCTREE - PLA - Rainbow - Macron -1kg - 1.75mm remove
NameCRON - PLA - Shining Rainbow - 1kg - 1.75mm removeFil X - SBS - Skin 02 - 1kg - 1.75mm removeCRON - PLA - Multi Colour (Rainbow) - 1kg - 1.75mm removeSunLu - Filament - Silky PLA+ - Light Rainbow - 1kg - 1.75mm removeCCTREE - PLA Silk - Dual -Gold/ Purple - 1kg - 1.75mm removeCCTREE - PLA - Rainbow - Macron -1kg - 1.75mm remove
ImageSUNLU - SILKY PLA+ FILAMENT – LIGHT RAINBOWCCTREE - PLA - Dual - Purple/GoldCCTREE - PLA - Rainbow - Macaron
SKUCRONSHININGRBSBS175-1-SKIN02CRONMULTIPCFSUN1PLASILKR2CCTREEDUALPURGOLCCTREEMACRAINBOW
Rating
Price
R400.00
R295.00
R500.00
R450.00
R520.00
R520.00
Stock
Out of stock
Only 2 items left in stock!
Out of stock
3 in stock
Only 2 items left in stock!
Out of stock
DescriptionFil X recommends a Nozzle Temperature of 215 – 230°C And a Bed temperature of 70°CSpecifications:
  • Amount: 1kg
  • Colour: Multi colour
  • Diameter: 1.75mm
  • Tollerance: +- 50 Micron
  • Spool dimensions: OD = 200mm, ID = 54mm, Width = 67mm
  • Recommended printing temperature: 190 Deg C
  • Recommended bed temperature: 50-70 Deg C
  • Recommended bed preparation: Hairspray
  • Note: An additional cooling fan is recommended for PLA

SUNLU SILKY PLA+ FILAMENT – SUGGESTED PRINT SETTINGS:

  • Nozzle: Temperature (°C)         

– 190°C to 230°C

  • Nozzle: Material

– Brass / Any

  • Nozzle: Size (mm)

– Standard: 0.4mm

  • Bed: Temperature (°C)

– No Heat / 50 to 70

  • Bed: Adhesion

– BuildTak / Magigoo / Painters Tape / PEI

  • Printing Speed (mm/s)

– 30 to 60

  • Part Cooling Fan

– On 100% from Layer 2+

CCTREE PLA FILAMENT - TECHNICAL SPECIFICATIONS:

  • Brand

– CCTREE                                                                               

  • Colour

– Dual Colour

  • Primary Material

– PLA (Polylactic Acid)

  • Filament Diameter

– 1.75mm

  • Diameter Tolerance

– ±0.05mm

  • Recommended Print Temperature

– 190° to 220°C

  • Recommended Bed Temperature

– No Heat / 50° to 70°C

  • Spool Size (OD x ID x W)

– 200 x 55 x 68mm

  • Net Weight / Packaged Weight

– 1kg / 1.5kg

CCTREE PLA FILAMENT - TECHNICAL SPECIFICATIONS:
  • Brand
– CCTREE
  • Colour
– Rainbow Colour
  • Primary Material
– PLA (Polylactic Acid)
  • Filament Diameter
– 1.75mm
  • Diameter Tolerance
– ±0.05mm
  • Recommended Print Temperature
– 190° to 220°C
  • Recommended Bed Temperature
– No Heat / 50° to 70°C
  • Spool Size (OD x ID x W)
– 200 x 55 x 68mm
  • Net Weight / Packaged Weight
– 1kg / 1.5kg
Weight1.2 kg1.2 kg1.2 kg1.2 kg1.2 kg1.2 kg
Dimensions22 × 22 × 8 cm22 × 22 × 7 cm22 × 22 × 7 cm22 × 22 × 7 cm22 × 22 × 7 cm22 × 22 × 7 cm
Additional information
Weight 1.2 kg
Dimensions 22 × 22 × 8 cm
Weight 1.2 kg
Dimensions 22 × 22 × 7 cm
Weight 1.2 kg
Dimensions 22 × 22 × 7 cm
Weight 1.2 kg
Dimensions 22 × 22 × 7 cm
Weight 1.2 kg
Dimensions 22 × 22 × 7 cm
Weight 1.2 kg
Dimensions 22 × 22 × 7 cm
Add to cart

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Add to cart
Click outside to hide the comparison bar
Compare
Need Help? Chat with us