CCTREE – Silk PLA – Silk Rainbow Purple – Cosmic -1kg – 1.75mm
Product details
CCTREE PLA filament is the new kid on the block, and is rapidly becoming known as the go-to affordable 3D filament in South Africa, which prints reliably and packs a punch when it comes to quality, smooth print finishes. If you are looking for a daily filament which offers great printing results every time without breaking the bank, then CCTREE Filament is the ideal choice for you.
PLA (Polylactic Acid) is a biodegradable thermoplastic which is derived from renewable organic resources such as sugarcane and corn starch.
This makes PLA Filament a surprisingly eco-friendly plastic to print with when compared to other petrochemical based filament options, and the wide range of colours and additives makes it one of the most versatile ranges too.
PLA is by far the most commonly used 3D Printer Filament in the world, partially due to its above-mentioned environmental friendliness, but mostly because it is extremely easy to use and print with as well. PLA is great for beginners who are just getting started, as it has a low shrinkage factor compared to ABS or Nylon, and due to the composition of the plastics, it doesn’t need an enclosure to print large objects – which would typically be prone to warping or layer separation.
A heated bed is not essential, but if used and set to a temperature of around 40° to 70°C, a heated build surface can go a long way in aiding print quality and bed adhesion. Commonly used Bed Adhesion Aids for PLA filament include Blue Painters tape (masking tape), cheap hairspray, Kapton Tape, PEI and BuildTak. PLA’s glass transition temperature (when it starts getting soft and malleable) is around 50°C, and is extruded at temperatures between 190° and 220°C. However, just remember that printing small or detailed parts will require a part cooling fan for optimal results.
Shipping and Returns
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.
CCTREE
There are no question found.
Quick Comparison
| CCTREE - Silk PLA - Silk Rainbow Purple - Cosmic -1kg - 1.75mm remove | Creality - Ender-3 V2/Neo - Carborundum Glass remove | Fil X - SBS - Lilac - 1kg - 1.75mm remove | SAFilament - PETG - Grey - 2.5KG - 1.75mm remove | Fil X - SBS - Translucent - Green -1kg - 1.75mm remove | Fil X - SBS - Translucent - Yellow -1kg - 1.75mm remove | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | CCTREE - Silk PLA - Silk Rainbow Purple - Cosmic -1kg - 1.75mm remove | Creality - Ender-3 V2/Neo - Carborundum Glass remove | Fil X - SBS - Lilac - 1kg - 1.75mm remove | SAFilament - PETG - Grey - 2.5KG - 1.75mm remove | Fil X - SBS - Translucent - Green -1kg - 1.75mm remove | Fil X - SBS - Translucent - Yellow -1kg - 1.75mm remove | ||||||||||||||||||||||||
| Image | |  |  |  |  |  | ||||||||||||||||||||||||
| SKU | CCTREECOSMICRBOW | SBS175-1-GlassBed | FILX-SBS-LILAC | SA-FPETG-A03-250175TB | FILXTRANSGREEN | FILXTRANSYELLOW | ||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||
| Price | R515.00 | R300.00 | R295.00 | Original price was: R750.00.R745.00Current price is: R745.00. Save 1% | R295.00 | R295.00 | ||||||||||||||||||||||||
| Stock |
Only 1 item left in stock!
|
Only 1 item left in stock!
|
6 in stock
|
Only 2 items left in stock!
|
Only 2 items left in stock!
|
Only 2 items left in stock!
| ||||||||||||||||||||||||
| Availability | Only 1 item left in stock! | Only 1 item left in stock! | 6 in stock | Only 2 items left in stock! | Only 2 items left in stock! | Only 2 items left in stock! | ||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||
| Description |
| Fil X recommends a Nozzle Temperature of 220 – 250°C And a Bed temperature of 80°C | Print Temperature: 235 – 255°C, dependent on printer model
Heat Bed temperature: 65 – 85°C​
​Fan speed / Cooling: 0 - 50%
1Kg net weight -Â 340m per roll
1.5Kg Total shipping weight
Accurate diameter of 1.75mm with a tolerance of ± 0.05mm
Spool Size: diameter 200mm, inner hub 58mm & Width 55mmÂ
Vacuum bagged and packaged in card board box
| Fil X recommends: A Nozzle Temperature of 195 – 215°C And a Bed temperature of 60°C | Fil X recommends: A Nozzle Temperature of 215°C - 230°C And a Bed temperature of 70°C | |||||||||||||||||||||||||
| Content | CCTREE PLA filament is the new kid on the block, and is rapidly becoming known as the go-to affordable 3D filament in South Africa, which prints reliably and packs a punch when it comes to quality, smooth print finishes. If you are looking for a daily filament which offers great printing results every time without breaking the bank, then CCTREE Filament is the ideal choice for you. PLA (Polylactic Acid) is a biodegradable thermoplastic which is derived from renewable organic resources such as sugarcane and corn starch. This makes PLA Filament a surprisingly eco-friendly plastic to print with when compared to other petrochemical based filament options, and the wide range of colours and additives makes it one of the most versatile ranges too. PLA is by far the most commonly used 3D Printer Filament in the world, partially due to its above-mentioned environmental friendliness, but mostly because it is extremely easy to use and print with as well. PLA is great for beginners who are just getting started, as it has a low shrinkage factor compared to ABS or Nylon, and due to the composition of the plastics, it doesn’t need an enclosure to print large objects - which would typically be prone to warping or layer separation. A heated bed is not essential, but if used and set to a temperature of around 40° to 70°C, a heated build surface can go a long way in aiding print quality and bed adhesion. Commonly used Bed Adhesion Aids for PLA filament include Blue Painters tape (masking tape), cheap hairspray, Kapton Tape, PEI and BuildTak. PLA’s glass transition temperature (when it starts getting soft and malleable) is around 50°C, and is extruded at temperatures between 190° and 220°C. However, just remember that printing small or detailed parts will require a part cooling fan for optimal results. | This is a replacement Carborundum glass bed for the Creality Ender-3 V2. It comes with a protective film and the perforated printing on top of the glass for perfect print adhesion.
Specifications:
| TOUGH YET FLEXIBLE FIL X SBS Did you know that you are in daily contact with SBS products such as the soles of your shoes or the tyres of your car? But how can SBS be used in FDM 3D printing? SBS (Styrene-butadiene-styrene) has the unique properties of being both tough and flexible at the same time, thanks to its Polystyrene origin lending it a hard, tough consistency and the Polybutadiene giving it a bit more bounce with its rubbery properties. This powerhouse combination offers, apart from good layer adhesion, no odour during printing and does not absorb moisture. Furthermore, it has been FDA and EU directive approved for food contact. Fil X SBS filament is very easy to print with on a glass bed with some hairspray for better bed adhesion and best of all can be smoothed with d-limonene (also available from Fil X!) leaving you with a stunning finished product. | PETG is short for polyethylene terephthalate glycol-modified, and is a transparent type of Copolyester. PETG is the perfect filament to combine strength and ductility, which is why it's used in so many mechanical parts and robotics. It has great chemical resistance with good water, acidic and alkalic resistance. PETG in its raw form is also FDA and EU commission regulation approved as Food Contact Safe. ​ | TOUGH YET FLEXIBLE
FIL X SBS
Did you know that you are in daily contact with SBS products such as the soles of your shoes or the tyres of your car? But how can SBS be used in FDM 3D printing?
SBS (Styrene-butadiene-styrene) has the unique properties of being both tough and flexible at the same time, thanks to its Polystyrene origin lending it a hard, tough consistency and the Polybutadiene giving it a bit more bounce with its rubbery properties. This powerhouse combination offers, apart from good layer adhesion, no odour during printing and does not absorb moisture. Furthermore, it has been FDA and EU directive approved for food contact.
Fil X SBS filament is very easy to print with on a glass bed with some hairspray for better bed adhesion and best of all can be smoothed with d-limonene (also available from Fil X!) leaving you with a stunning finished product. | TOUGH YET FLEXIBLE
FIL X SBS
Did you know that you are in daily contact with SBS products such as the soles of your shoes or the tyres of your car? But how can SBS be used in FDM 3D printing?
SBS (Styrene-butadiene-styrene) has the unique properties of being both tough and flexible at the same time, thanks to its Polystyrene origin lending it a hard, tough consistency and the Polybutadiene giving it a bit more bounce with its rubbery properties. This powerhouse combination offers, apart from good layer adhesion, no odour during printing and does not absorb moisture. Furthermore, it has been FDA and EU directive approved for food contact.
Fil X SBS filament is very easy to print with on a glass bed with some hairspray for better bed adhesion and best of all can be smoothed with d-limonene (also available from Fil X!) leaving you with a stunning finished product. | ||||||||||||||||||||||||
| Weight | 1.2 kg | 1.2 kg | 1.2 kg | 1.2 kg | 1.2 kg | 1.2 kg | ||||||||||||||||||||||||
| Dimensions | 22 × 22 × 7 cm | 28 × 28 × 8 cm | 22 × 22 × 7 cm | 24 × 24 × 17 cm | 22 × 22 × 7 cm | 22 × 22 × 7 cm | ||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
| ||||||||||||||||||||||||
| Sold | 13 | 8 | 5 | 9 | 4 | 2 | ||||||||||||||||||||||||
| Shipping |
Rating & Review
There are no reviews yet.