info@mrfilament.co.za Follow us on Social Media
Sold
out

CCTREE – Silk PLA – Dual – Gold / Copper – 1kg – 1.75mm

R520.00
Out of stock
Estimated Delivery:
21 - 28 Apr, 2024
Free Shipping & Returns:
On all orders over R5,000.00

Description

CCTREE PLA filament is the new kid on the block, and is rapidly becoming known as the go-to affordable 3D filament in South Africa, which prints reliably and packs a punch when it comes to quality, smooth print finishes. If you are looking for a daily filament which offers great printing results every time without breaking the bank, then CCTREE Filament is the ideal choice for you.

PLA (Polylactic Acid) is a biodegradable thermoplastic which is derived from renewable organic resources such as sugarcane and corn starch.

 

This makes PLA Filament a surprisingly eco-friendly plastic to print with when compared to other petrochemical based filament options, and the wide range of colours and additives makes it one of the most versatile ranges too.

 

PLA is by far the most commonly used 3D Printer Filament in the world, partially due to its above-mentioned environmental friendliness, but mostly because it is extremely easy to use and print with as well. PLA is great for beginners who are just getting started, as it has a low shrinkage factor compared to ABS or Nylon, and due to the composition of the plastics, it doesn’t need an enclosure to print large objects – which would typically be prone to warping or layer separation.

 

A heated bed is not essential, but if used and set to a temperature of around 40° to 70°C, a heated build surface can go a long way in aiding print quality and bed adhesion. Commonly used Bed Adhesion Aids for PLA filament include Blue Painters tape (masking tape), cheap hairspray, Kapton Tape, PEI and BuildTak. PLA’s glass transition temperature (when it starts getting soft and malleable) is around 50°C, and is extruded at temperatures between 190° and 220°C. However, just remember that printing small or detailed parts will require a part cooling fan for optimal results.

 

Quick Comparison

SettingsCCTREE - Silk PLA - Dual - Gold / Copper - 1kg - 1.75mm removeFil X - PLA - Glitter Red - 0.5kg - 1.75mm removeWanhao - PLA - Galaxy Glow In The Dark Green -1kg - 1.75mm removeFil X - PLA - Glitter Purple - 1kg - 1.75mm removeCRON - PLA - Rainbow Kingfisher - 1kg - 1.75mm removeFil X - SBS - Skin 02 - 1kg - 1.75mm remove
NameCCTREE - Silk PLA - Dual - Gold / Copper - 1kg - 1.75mm removeFil X - PLA - Glitter Red - 0.5kg - 1.75mm removeWanhao - PLA - Galaxy Glow In The Dark Green -1kg - 1.75mm removeFil X - PLA - Glitter Purple - 1kg - 1.75mm removeCRON - PLA - Rainbow Kingfisher - 1kg - 1.75mm removeFil X - SBS - Skin 02 - 1kg - 1.75mm remove
ImageWanhao - PLA - Galaxy Glow In The Dark Green
SKUCCTREEDUALGLDCOPWanhaoGalaxyGIDWanhaoRB-1SBS175-1-SKIN02
Rating
Price
R520.00
R295.00
R380.00
R450.00
R470.00
R295.00
Stock
Out of stock
Out of stock
Only 2 items left in stock!
Only 1 item left in stock!
Out of stock
Only 2 items left in stock!
Description
CCTREE PLA FILAMENT - TECHNICAL SPECIFICATIONS:
  • Brand
– CCTREE
  • Colour
– Dual
  • Primary Material
– PLA (Polylactic Acid)
  • Filament Diameter
– 1.75mm
  • Diameter Tolerance
– ±0.05mm
  • Recommended Print Temperature
– 190° to 220°C
  • Recommended Bed Temperature
– No Heat / 50° to 70°C
  • Spool Size (OD x ID x W)
– 200 x 55 x 68mm
  • Net Weight / Packaged Weight
– 1kg / 1.5kg
Fil X recommends: A Nozzle Temperature of 195 – 215°C And a Bed temperature of 60°C
  • Amount: 1kg
  • Colour: Glow in the dark green
  • Diameter: 1.75mm
  • Tollerance: +- 50 Micron
  • Spool dimensions: OD = 200mm, ID = 51mm, Width = 60mm
  • Recommended printing temperature: 200 Deg C
  • Recommended bed temperature: 50-70 Deg C
  • Recommended bed preparation: Hairspray
  • Note: An additional cooling fan is recommended for PLA
Fil X recommends: A Nozzle Temperature of 195 – 215°C And a Bed temperature of 60°C
  • Specifications:
    • Amount: 1kg
    • Colour: Rainbow Kingfisher
    • Diameter: 1.75mm
    • Tolerance: +- 50 Micron
    • Spool dimensions: OD = 200mm, ID = 54mm, Width = 67mm
    • Recommended printing temperature: 200 Deg C
    • Recommended bed temperature: 60 Deg C
    • Recommended bed preparation: Hairspray
    • Note: Additional cooling fan recommended for Silk filament
Fil X recommends a Nozzle Temperature of 215 – 230°C And a Bed temperature of 70°C
Weight1.2 kgN/A1.2 kgN/A1.2 kg1.2 kg
Dimensions22 × 22 × 7 cm22 × 22 × 4 cm22 × 22 × 7 cm22 × 22 × 7 cm22 × 22 × 7 cm22 × 22 × 7 cm
Additional information
Weight 1.2 kg
Dimensions 22 × 22 × 7 cm
Dimensions 22 × 22 × 4 cm
Weight 1.2 kg
Dimensions 22 × 22 × 7 cm
Dimensions 22 × 22 × 7 cm
Weight 1.2 kg
Dimensions 22 × 22 × 7 cm
Weight 1.2 kg
Dimensions 22 × 22 × 7 cm
Add to cart

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Add to cart
Click outside to hide the comparison bar
Compare
Need Help? Chat with us